This site contains affiliate links. As an Amazon Associate, I earn a commission from qualifying purchases at no extra cost to you. Full Disclosure Here.
If you are looking to improve your shooting accuracy with your Ruger 10/22 rifle, then a scope mount could be the perfect solution. Installing a scope mount on your rifle adds stability and precision to your shots by allowing you to use the optics of a telescope or red dot sight. With more accuracy and power than iron sights, scope mounts can help you make the most of your Ruger 10/22 rifle.
The Ruger 10/22 rifle is one of the most popular .22 caliber rifles on the market today, used for hunting small game, target shooting, and plinking. Mounting a scope onto this particular firearm allows shooters to increase their accuracy at long-range distances—something that would be difficult with iron sights alone.
When looking for a scope mount for your Ruger 10/22 rifle, there are several options available. The first thing to consider when selecting one is what type of mounting system it uses. Most models will feature either Weaver or Picatinny rails that allow you to easily attach the mounting hardware onto the top rail of the gun. Additionally, some models offer quick detach systems that make removing and installing scopes easier without tools.
Once you’ve selected the mounting system that works best for you, it’s time to decide which type of mount is right for your needs. You’ll find several varieties available ranging from single-piece fixed mounts, two-piece adjustable mounts, and even one-piece extended scopes for longer-range shooting applications. Depending on what type of shooting activities you plan on engaging in with your Ruger 10/22 will determine which type of mount would best fit those needs.
Finally, once you have settled on the type and model of mount perfect for your Ruger 10/22, it’s time for installation! While this process can vary slightly depending on which type of mount and gun model you have chosen, it typically involves attaching either hex screws or thumbscrews into pre-drilled holes in both the gun receiver and the bottom part of the scope ring itself before tightening them down securely with an appropriate driver bit or wrench tool.
This will ensure proper alignment and secure attachment between both components so they function properly together when aiming down range at targets.
If you have access you should always use a torque wrench on the mounting screws, it will save you a lot of time and trouble down the road. Also, before you mount the rings or mounts, clean everything well with your favorite gun cleaner, and then use a small amount of MEDIUM Strength BLUE Loctite as you get close to getting all of those pieces with the tightest tolerances leveled and all the bolts tightened in an X pattern to the proper torque specifications from the manufacturer.
Monstrum Ruger 10/22 Picatinny Rail Mount with Integrated Level Bubble
- Picatinny rail mount for Ruger 10/22 model rifles with integrated level bubble
- Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics
- Installs via included set screws into the Ruger 10/22 factory mounting holes
- Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle
WEAVER Multi-Slot Base System - 430T for Ruger 10/22, Gloss Black
Weaver® Mounting Systems brings more than 90 years of innovation and expertise to the shooting experience. Engineered to be the most reliable scope mount system available, Weaver offers a full line of rings, bases, & mounts.
Founded in 1930 by the visionary William R. Weaver, the company is credited with bringing riflescopes to the mainstream by producing quality scopes and mounts that average American hunters could afford. The very first Scope, model 3-30, came complete with a Weaver scope mount.
Weaver forged his name in the industry with innovations that have since become standards of excellence and built a company based on the sound principle of providing consumers with affordable products. That principle guides Weaver today under the ownership and backing of Vista Outdoor.
Monstrum Ruger 10/22 Rifle Scope Rings with See-Through Base
- Dedicated scope mounting platform built specifically for the Ruger 10/22
- Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required
- The rings are available in 1-inch and 30-mm-diameter versions. Confirm the diameter of your scope tube before purchasing.
- 1 inch in height with a see-through base, allowing for simultaneous use of iron sights
Monstrum Precision Scope Rings | 1-inch Diameter
- 100% Weave
- 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1-inch diameter rings for mounting standard 1-inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inches, 1.00 inch, 1.20 inch, and 1.35 inch
Game Reaper Ruger 10/22 Medium Mount
- The Game Reaper One-Piece Scope Mount from DNZ Products is lightweight and rugged, with extreme accuracy. It is also the simplest, easiest scope mount to install in the firearms industry.
- No Lapping Required
- Machined from a solid block of 6061T6 aluminum
- Totally American-made and packaged
- Up to 4-times more thread length-a full 1/2 inch
Monstrum Ruger 10/22 Picatinny Rail Mount for Scopes and Optics
Light in Weight, Yet Strong and Durable!
Crafted from lightweight 6061 aluminum, the rail weighs in at a mere 1.3 ounces!
11 Slots To Fit Your Preferred Optics
Comfortably fit your red dots, compact scopes, and even short-mid-range rifle scopes onto your Ruger 10/22.
The rail sections are compatible with all Picatinny or Weaver-based optics.
Optimized For Your Ruger 10/22 Rifle
The Monstrum Ruger 10/22 rail has been machined to match the curvature of the upper of your Ruger 10/22, which results in an OE fitment.
The u-shaped convex design on the top of our rails allows you to use your OEM sights when the rail is still attached.
Installs in Minutes!
The provided screws tread into your Ruger 10/22 easily without any modifications required.
Conclusion
Installing a Ruger 10/22 scope mount can significantly improve accuracy at long-range distances while being used in the popular .22 caliber rifle categories. Thankfully there are several types available featuring different mounting systems as well as adjustable and extended versions that cater to various shooting applications so finding an appropriate option is easy no matter what kind of shooter you are!
